Preventing Mildew
Painted Wood, Concrete and Tile
To
remove mildew stains from bathroom tile, painted wood and naturally
hard surfaces, a bleach solution or mildew stain removers may be
used. Just spray mildew stains and watch them disappear. Scrub the
area with a stiff brush to ensure that you have killed any mildew
growth that may have embedded itself into the surface. Clothing
and Fabrics Remove mildew spots as soon as you discover them. Do
not give the mold a chance to weaken or rot the material. Brush
off any surface growth outdoors to prevent scattering the mildew
spores in the house. Sun and air fabrics thoroughly. If any mildew
spots remain, treat washable articles as described below. Dry clean
non-washable articles. Wash mildew-stained articles at once with
soap or detergent and water. Rinse well and dry in the sun. If any
stains remain use lemon juice and salt, or bleach (1 part bleach
to 5 parts water). If you use bleach, test colored fabrics for color-fastness.
Upholstered
Articles, Mattresses and Rugs
First,
remove loose mold from outer coverings of upholstered articles,
mattresses, rugs and carpets by brushing with a broom or stiff brush.
Do this outdoors if possible to prevent scattering mildew spores
in the house. Next, run a vacuum cleaner attachment over the surface
of the article to draw out more of the mold. Remember the mold spores
are being drawn into the bag of the vacuum cleaner. If the vacuum
cleaner has a disposable bag, remove and dispose of it immediately.
If not, empty the bag carefully (preferably outdoors) to avoid scattering
mold spores in the house. Do everything conveniently possible to
dry, sun and air the article to stop the mold growth. If mildew
remains on upholstered articles or mattresses, sponge lightly with
thick suds of soap or detergent, and wipe with a clean, damp cloth.
In doing this , get as little water on the fabric as possible so
the filling does not get wet. Another way to remove mildew on upholstered
furniture is to wipe it with a cloth moistened with diluted alcohol.
Dry the article thoroughly. Sponge mildewed rugs and carpets with
thick suds or a rug shampoo, then remove the suds by wiping with
a cloth dampened with clear water.
Dry
in the sun, if possible. If molds have grown into the inner part
of the article, send it to a reliable disinfecting and fumigating
service. Such services are listed under "Exterminating and
Fumigating" or "Pest Control" in the yellow pages
of your telephone book.
Unpainted
Wood
Use
heat and increase the air circulation to get mildewed wood as dry
as possible. Badly infected wood may need to be replaced preferably
with wood that has been treated or that is naturally decay resistant.
Thoroughly clean mildewed surfaces, woodwork, and other wooden parts
using mildew stain removers. Rinse the wood with water, and allow
the wood to dry thoroughly. Then apply a mildew-resistant paint.
Leather
Goods
To
remove mildew from leather goods, wipe with a cloth moistened with
diluted alcohol. Dry in a current of air. If mildew remains, wash
with thick suds made from a mild detergent, saddle soap, or a soap
containing a germicide or fungicide. Then wipe with a damp cloth
and dry in an airy place.
Paper
and Books
Remove
any dry, loose mold from paper with a clean, soft cloth. If mildewed
paper is damp, dry it first - in an airy place, if possible. To
dry wallpaper, plaster, as well as the paper, heat the room for
several hours (or even days) to dry. Plaster should be dried slowly
to prevent cracking. If mildewed paper is washable, wipe it gently
with a cloth wrung out of thick soapsuds, then with clean water.
Take care not to wet the paper more than necessary. Do not scrub
it. Finally, pat with a soft, dry cloth. If stains remain, bleach
with a 1:5 solution of household bleachwater, then sponge with a
cloth wrung out of clear water. For small stains, a commercial ink
eradicator may be useful. Spread pages of books out fan wise to
air. If the books are very damp, sprinkle cornstarch or talcum powder
between the leaves to take up the moisture. Leave starch or powder
on for several hours, then brush off.
SUMMARY
We
at Damp Rid hope the information in this guide helps you prevent
mildew, mold and other musty odors in your home. We always like
to hear comments or suggestions from our customers, and we invite
you to call us on our toll free customer Help Line 1-888-326-7743.
We also make our products available via our e-commerce website.
Just call or write us, and we will be happy to help you.
DampRid products are manufactured in Orlando, Florida
by DampRid, Inc.
Call us at
1-888-DAMPRID
DampRid is now celebrating more than 50 years of business.
Selling our widely popular product line the world-over, we're
looking forward to the next 50 years!
|
Video
Snapshot view or download
.gif) |
.gif) |
Testimonials
|
![]() |
.gif) |
.gif) |
"Before using DampRid, there was a musty
smell in my closet. At times, my boots would get a moldy
film on them. After using DampRid, both problems
have been completely eliminated." P.
Robbins Palm Beach, FL
"DampRid is absolutely amazing! I never knew that
there was so much moisture in my closet! My closet always
smelled a little musty, but this product absorbed the odor and
the moisture."
B. Turner Austin, TX
"DampRid absorbs the excess moisture that can
collect in your storage unit and help protect your valuables
from excess moisture damage. At less than a few
dollars per bucket, it's a pretty wise
investment!" C. Shafer Miami,
FL
|
.gif) |
![]() |
|